YOKOGAWA AQ6370D - Page 436

App-65
IM AQ6370D-01EN
Appendix
1
2
3
4
5
6
7
8
9
10
11
App
Index
ADVANCE
1
2
1-1
1-2
1-3
1-4
1-5
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
2-3-1
2-3-2
2-3-3
2-3-4
2-3-5
2-3-6
2-3-7
2-3-8
2-4-1
2-4-2
2-4-4
2-4-5
2-4-6
2-4-7
2-4-8
2-4-6-1
2-4-6-2
1 Template settings (7.12)
1-1 GO/NO GO ON/OFF (7.12)
1-2 Displaying templates (7.12)
1-3 Setting the template type (7.12)
1-4 Editing templates (7.12)
1-5 Setting the template shift amount (7.12)
2 Sets data logging (7.15)
2-1 Executes data logging (7.15)
2-2 Stops data logging (7.15)
2-3 Displays cursors and scales (7.15)
2-3-1 Selects the cursor display (7.15)
2-3-2 Turns off the cursor display (7.15)
2-3-3 Expands the horizontal scale at the current cursor position (7.15)
2-3-4 Reduces the horizontal scale at the current cursor position (7.15)
2-3-5 Expands the vertical scale at the center of the measured values
(7.15)
2-3-6 Reduces the vertical scale at the center of the measured values
(7.15)
2-3-7 Initializes the display scale (7.15)
2-3-8 Loads the waveform data of the logging data into the specified trace
(7.15)
2-4 Sets data logging conditions (7.15)
2-4-1 Sets logging parameters (7.15)
2-4-2 Sets analysis conditions (7.15)
2-4-4 Selects the data to display a graph of (7.15)
2-4-5 Selects the number of channels to display on the graph (7.15)
2-4-6 Sets the table data display mode (7.15)
2-4-6-1 Selects current values display or summary display (7.15)
2-4-6-2 Selects maximum/minimum values or average/standard
deviation values (7.15)
2-4-7 Sets the table data value display mode (7.15)
2-4-8 Sets the reference value for displaying relative values of the table
data (7.15)
2-5 Deletes logging data (7.15)
2-6 Displays waveform data while data logging is in progress (7.15)
2-7 Saves logging data (7.15)
2-8 Loads logging data (7.15)
Appendix 7 Soft Key Tree Diagram