Zebra DS2278

Symbologies 12 - 5
Interleaved 2 of 5 Security Level 1121 F8h 04h 61h Security Level 1 12-52
Interleaved 2 of 5 Reduced Quiet Zone 1210 F8h 04h BAh Disable 12-53
Discrete 2 of 5 (DTF/D 2 of 5)
Discrete 2 of 5 5 05h Disable 12-53
Set Lengths for Discrete 2 of 5 20, 21 14h 15h 1 to 55 12-54
Codabar (NW - 7)
Codabar 7 07h Enable 12-56
Set Lengths for Codabar 24, 25 18h, 19h 4 to 55 12-56
CLSI Editing 54 36h Disable 12-58
NOTIS Editing 55 37h Disable 12-58
Codabar Upper or Lower Case Start/
Stop Characters Detection
855 F2h 57h Upper Case 12-59
MSI
MSI 11 0Bh Disable 12-59
Set Lengths for MSI 30, 31 1Eh, 1Fh 4 to 55 12-60
MSI Check Digits 50 32h One 12-62
Transmit MSI Check Digit 46 2Eh Disable 12-62
MSI Check Digit Algorithm 51 33h Mod 10/Mod 10 12-63
MSI Reduced Quiet Zone 1392 F8h 05h 70h Disable 12-63
Chinese 2 of 5
Chinese 2 of 5 408 F0h 98h Disable 12-64
Matrix 2 of 5
Matrix 2 of 5 618 F1h 6Ah Disable 12-64
Matrix 2 of 5 Lengths 619
620
F1h 6Bh
F1h 6Ch
4 to 55 12-65
Matrix 2 of 5 Check Digit 622 F1h 6Eh Disable 12-67
Transmit Matrix 2 of 5 Check Digit 623 F1h 6Fh Disable 12-67
Table 12-1 Symbology Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.