Zebra DS2278 - Page 222

12 - 6 DS2278 Digital Scanner Product Reference Guide
Korean 3 of 5
Korean 3 of 5 581 F1h 45h Disable 12-68
Inverse 1D 586 F1h 4Ah Regular 12-69
GS1 DataBar
GS1 DataBar Omnidirectional (formerly
GS1 DataBar-14), GS1 DataBar Truncated,
GS1 DataBar Stacked, GS1 DataBar
Stacked Omnidirectional
338 F0h 52h Enable 12-70
GS1 DataBar Limited 339 F0h 53h Enable 12-70
GS1 DataBar Expanded, GS1 DataBar
Expanded Stacked
340 F0h 54h Enable 12-71
Convert GS1 DataBar to UPC/EAN/JAN 397 F0h 8Dh Disable 12-71
GS1 DataBar Limited Margin Check 728 F1h D8h Level 3 12-72
GS1 DataBar Security Level 1706 F8h 06h AAh Level 1 12-73
Symbology-Specific Security Features
Redundancy Level 78 4Eh 1 12-74
Security Level 77 4Dh 1 12-76
1D Quiet Zone Level 1288 F8h 05h 08h 1 12-77
Intercharacter Gap Size 381 F0h 7Dh Normal 12-78
Composite Codes
Composite CC-C 341 F0h 55h Disable 12-78
Composite CC-A/B 342 F0h 56h Disable 12-79
Composite TLC-39 371 F0h 73h Disable 12-79
Composite Inverse 1113 F8h 04h 59h Regular Only 12-80
UPC Composite Mode 344 F0h 58h UPC Never Linked 12-81
Composite Beep Mode 398 F0h 8Eh Beep As Each
Code Type is
Decoded
12-82
GS1-128 Emulation Mode for UCC/EAN
Composite Codes
427 F0h ABh Disable 12-82
Table 12-1 Symbology Parameter Defaults (Continued)
Parameter
Parameter
Number
1
SSI Number
2
Default
Page
Number
1. Parameter number decimal values are used for programming via RSM commands.
2. SSI number hex values are used for programming via SSI commands.