About This Guide
10
Chapter Descriptions
Topics covered in this guide are as follows:
• Quick Start provides a Quick Start tag reading demonstration.
• Getting Started provides the FX7500 and FX9600 RFID fixed readers features, parts, and LED
indications.
• Installation and Communication provides information on installing and setting up the FX7500 and
FX9600 readers.
• Administrator Console describes how to connect to the reader and how to use the web-based
Administrator Console to configure and manage FX7500 and FX9600 readers.
• Configure and Connect via Wi-Fi and Bluetooth details wireless network advanced configuration,
preferred configurations for access points, and how to connect to a peer device over Bluetooth
using a USB Bluetooth dongle.
• Application Development provides information on developing applications for the FX7500 and
FX9600, and includes references to the appropriate guides.
• Firmware Upgrade provides reader firmware upgrade information on using the web-based
Administrator Console and an FTP or FTPS server running a host computer.
• Troubleshooting describes FX7500 and FX9600 readers troubleshooting procedures.
• Technical Specifications includes the technical specifications for the readers.
• Static IP Configuration describes three methods of setting the static IP address on an FX7500 and
FX9600 RFID Reader.
• RF Air Link Configuration describes how to select air link configuration from a set of available air
link profiles.
• Copying Files To and From the Reader describes the SCP, FTP, and FTPS protocols for copying
files.
• Data Protection describes how the FX7500 and FX9600 protects RFID data in transition.