Administrator Console
85
• The package must contain a stop script in the name of stop_packageName.sh to stop the binary or
binaries in the package. For example, if the package name is package-1_2.1_all.deb (package 1 version
2.1), the name of stop script must be stop_package-1.sh.
Reader Profiles
Select Profiles in the selection menu to view the Reader Profiles window, which shows the current profiles
on the reader and allows performing profile-related operations.
The window displays a set of provided configuration files, or profiles, that a user can re-use and/or modify
depending on the reader application or use case. The profiles serve as configuration examples.
Figure 54 Reader Profiles Window
The
Reader Profiles window functions are:
• Available Profiles in the Reader - Displays the available reader profiles.
• Import - Click to open a file dialog and pick a profile (XML file) from the local PC and import it into
the reader.
• Export - Select an available profile and click Export to export profile information and save an XML
file onto the local drive.
• Set Active - Activates a selected profile. Select an available profile and click Set Active to load the
profile content in the reader.
NOTE: The reader executes the packages with the privileges of rfidadm user account. See the user
accounts section for information on rfidadm user privileges.
NOTE: Because the Reader Profiles window uses an applet to connect to the reader, enable JVM
support on the browser in order for this window to function properly.
CAUTION:Swapping profiles between readers using static IP addresses is not recommended. Activating
a profile with a static IP address changes the IP of the reader, and if not done properly can
make the reader inaccessible.