Administrator Console
84
Applications
Select Applications to view the User Application Page. This window allows installing applications on the
reader and provides details of the installed application.
Figure 53 User Application Page
The Existing Packages section includes the following options:
• List of Installed apps - The drop-down menu lists the current packages installed in the reader.
• Start/Stop - The image displays the running status as follows. Click the image to toggle the status.
• Green indicates application is running
• Red indicates application is not running
• AutoStart - Select this check box to run the application at startup.
• Uninstall - Removes the package from the reader.
To create packages for the FX Series readers, use any of the standard Debian package creation tools, or
create them manually. The FX Series SDK Programmers Guide provides details on creating application
packages to install on the reader.
• The package must contain a binary executable compatible with ELF 32-bit LSB executable, ARM, version 1,
GNU Linux.
• The name of the binary executable must match the name of the package, excluding the version name. For
example, if the package name is package-1_2.1_all (package 1 version 2.1), the name of the binary
executable must be package-1. There can be more than one binary in the package.
• The package must contain a startup script in the name of start_packageName.sh to start the binary or
binaries in the package. For example, if the package name is package-1_2.1_all.deb (package 1 version
2.1), the name of the startup script must be start_package-1.sh.
To Next Page
Loading...
