Administrator Console
86
• Delete - Select an available profile and click Delete to delete the profile.
Profiles can specify a number of reader parameters, including RF air link profiles. Air link profiles cannot
be configured using LLRP or web page interface. See Appendix , RF Air Link Configuration for more
information about air link profile configuration.
FIPS Support
The FX7500 and FX9600 supports FIPS 140-2 Level 1 for the following interfaces:
• HTTPS
• FTPS
• SSH
• LLRP Server
• IPSec
To enable or disable FIPS support in the reader profile, export the profile XML (CurrentConfig) from the
reader and set FIPS_MODE_ENABLED to 1 to enable FIPS, or 0 to disable FIPS. Then import the XML to the
reader and activate. Changing the FIPS mode restarts the reader. By default, FIPS is disabled.
NOTE: Current Config is a special logical profile that can only be exported to the PC. This cannot be
imported, activated, or deleted. Only the profile name indicates that it is the active profile.
To Next Page
Loading...
