Software Windows 7 3 - 25
• Config Ports - Select the COM Port from the ports window and adjust the port settings such as Baud
Rate, Data Bits, Parity, Flow Control, Stop Bits, and Timeout as desired.
•Set to Default - Sets the default for the selected COM port.
• Clear Unavailable Ports - Clears unavailable ports such as ports that are no longer active.
Figure 3-25 Config Ports (VC80 with Windows 7)
NOTE
For large bar codes, adjust the Timeout duration. The longer the timeout, the slower the scans.
To Next Page
Loading...
