83
BASIC CONFIGURATIONS
While performing basic configurations of the system, go to these sections for
information you are interested in:
■ “Basic Configurations” on page 1021
■ “CLI Features” on page 1027
Basic Configurations This section covers the following topics:
■ “Entering/Exiting System View” on page 1021
■ “Configuring the Device Name” on page 1021
■ “Configuring the System Clock” on page 1021
■ “Configuring a Banner” on page 1023
■ “Configuring CLI Hotkeys” on page 1025
■ “Configuring User Levels and Command Levels” on page 1026
■ “Displaying and Maintaining Basic Configurations” on page 1027
Entering/Exiting System
View
Follow these steps to enter/exit system view:
n
With the quit command, you can return to the previous view. You can execute the
return command or press the hot key <Ctrl+Z> to return to user view.
Configuring the Device
Name
Configuring the System
Clock
Configuring the system clock
Follow these steps to configure the system clock:
To do… Use the command… Remarks
Enter system view from user view system-view -
Return to user view from system view quit -
To do… Use the command… Remarks
Enter system view system-view -
Configure the device
name
sysname sysname Optional
The device name is 3Com by default.
To Next Page
Loading...
