3Com Switch 4800G 24-Port - Displaying and Maintaining PIM

658 CHAPTER 47: PIM CONFIGURATION
Displaying and
Maintaining PIM
Configure the maximum size
of a join/prune message
jp-pkt-size packet-size Optional
8,100 bytes by default
Configure the maximum
number of (S, G) entries in a
join/prune message
jp-queue-size queue-size Optional
1,020 by default
To do… Use the command… Remarks
To do… Use the command… Remarks
View the BSR information in
the PIM-SM domain and
locally configured C-RP
information in effect
display pim bsr-info Available in any
view
View the information of
unicast routes used by PIM
display pim claimed-route
[ source-address ]
Available in any
view
View the number of PIM
control messages
display pim control-message
counters [ message-type { probe |
register | register-stop } | [ interface
interface-type interface-number |
message-type { assert | bsr | crp |
graft | graft-ack | hello | join-prune |
state-refresh }] *]
Available in any
view
View the information about
unacknowledged graft
messages
display pim grafts Available in any
view
View the PIM information on
an interface or all interfaces
display pim interface [ interface-type
interface-number ] [ verbose ]
Available in any
view
View the information of
join/prune messages to send
display pim join-prune mode { sm
[ flags flag-value ] | ssm } [ interface
interface-type interface-number |
neighbor neighbor-address ] *
[ verbose ]
Available in any
view
View PIM neighboring
information
display pim neighbor [ interface
interface-type interface-number |
neighbor-address | verbose ] *
Available in any
view
View the content of the PIM
routing table
display pim routing-table
[ group-address [ mask { mask-length |
mask }] | source-address [ mask
{ mask-length | mask }] |
incoming-interface [ interface-type
interface-number | register ] |
outgoing-interface { include | exclude
| match } { interface-type
interface-number | register } | mode
mode-type | flags flag-value | fsm ] *
Available in any
view
View the RP information display pim rp-info [ group-address ] Available in any
view
Reset PIM control message
counters
reset pim control-message counters
[ interface interface-type
interface-number ]
Available in user
view