3Com Switch 4800G 24-Port - Displaying and Maintaining SNMP

Displaying and Maintaining SNMP 937
n
The extended linkUp/linkDown Traps comprise the standard linkUp/linkDown Traps
defined in RFC plus interface description and interface type. If the extended
messages are not supported on NMS, you can disable this function and enable the
device to send standard linkUp/linkDown Traps.
Displaying and
Maintaining SNMP
Configure target host
attribute for Traps
snmp-agent target-host
trap address udp-domain
{ ip-address | ipv6
ipv6-address } [ udp-port
port-number ] params
securityname security-string
[ v1 | v2c | v3
[ authentication | privacy ]]
Required
Configure the source address
for Traps
snmp-agent trap source
interface-type
{ interface-number |
interface-number.subnumber
}
Optional
Extend the standard
linkUp/linkDown Traps
defined in RFC
snmp-agent trap if-mib link
extended
Optional
Standard linkUp/linkDown
Traps defined in RFC are used
by default.
Configure the queue size for
sending Traps
snmp-agent trap
queue-size size
Optional
100 by default
Configure the lifetime for
Traps
snmp-agent trap life
seconds
Optional
120 seconds by default
To do… Use the command… Remarks
To do… Use the command… Remarks
Display SNMP-agent system
information, including the
contact, location, and version
of the SNMP
display snmp-agent sys-info [ contact
| location | version ]*
Available in any
view
Display SNMP agent statistics display snmp-agent statistics
Display the SNMP agent
switch fabric ID
display snmp-agent local-switch
fabricid
Display SNMP agent group
information
display snmp-agent group
[ group-name ]
Display the modules that can
send Traps and whether their
Trap sending is enabled or not
display snmp-agent trap-list
Display SNMP v3 agent user
information
display snmp-agent usm-user
[ switch fabricid switch fabricid |
username user-name | group
group-name ] *
Display SNMP v1 or v2c agent
community information
display snmp-agent community
[ read | write ]
Display MIB view information
for an SNMP agent
display snmp-agent mib-view
[ exclude | include | viewname
view-name ]