Configuring Information Center 1009
Note that there is a space between the timestamp and sysname (host name) fields.
Sysname
Sysname is the system name of the current host. You can use the sysname
command to modify the system name. (Refer to “System Maintaining” on page
1035 for details)
Note that there is a space between the sysname and module fields.
Module
The module field represents the name of the module that generates system
information. You can enter the info-center source ? command in system view to
view the module list.
Refer to Table 78 for module name and description.
Between “module” and “level” is a “/”.
Level (Severity)
System information can be divided into eight levels based on its severity, from 0 to
7. Refer to Table 76 for definition and description of these severity levels. Note
that there is a forward slash between the levels (severity) and digest fields.
Digest
The digest field is a string of up to 32 characters, outlining the system information.
Note that there is a colon between the digest and content fields.
Content
This field provides the content of the system information.
Configuring
Information Center
Information Center
Configuration Task List
Complete the following tasks to configure information center:
Setting to Output
System Information to
the Console
Setting to output system information to the console
Task Remarks
“Setting to Output System Information to the Console” on page 1009 Optional
“Setting to Output System Information to a Monitor Terminal” on page 1011 Optional
“Setting to Output System Information to a Log Host” on page 1012 Optional
“Setting to Output System Information to the Trap Buffer” on page 1012 Optional
“Setting to Output System Information to the Log Buffer” on page 1013 Optional
“Setting to Output System Information to the SNMP NMS” on page 1013 Optional
“Configuring Synchronous Information Output” on page 1014 Optional
To do… Use the command… Remarks
Enter system view system-view -
To Next Page
Loading...
