Console Port Login Configuration with Authentication Mode Being None 35
n
Changes of the authentication mode of console port login will not take effect
unless you exit and enter again the CLI.
Console Port Login
Configuration with
Authentication Mode
Being None
Configuration Procedure
Scheme Specify to
perform local
authentication or
RADIUS
authentication
AAA configuration
specifies whether to
perform local
authentication or
RADIUS authentication
Optional
Local authentication is
performed by default.
Refer to
“AAA/RADIUS/HWTACACS
Overview” on page 747.
Configure user
name and
password
Configure user names
and passwords for
local/remote users
Required
■ The user name and
password of a local user are
configured on the switch.
■ The user name and
password of a remote user
are configured on the
RADIUS server. Refer to
“Configuring RADIUS” on
page 765.
Manage AUX
users
Set service type for
AUX users
Required
Perform common
configuration
Perform common
configuration for
console port login
Optional
Refer to section “Common
Configuration” on page 33 for
more.
Table 6 Console port login configurations for different authentication modes
Authentication
mode Console port login configuration Description
To do… Use the command… Remarks
Enter system view system-view -
Enter AUX user interface
view
user-interface aux 0 -
Configure not to
authenticate users
authentication-mode
none
Required
By default, users logging in through
the console port are not
authenticated.
To Next Page
Loading...
