3Com Switch 4800G 24-Port - Displaying and Maintaining Qos Policy

876 CHAPTER 67: QOS POLICY CONFIGURATION
[Sysname] qos policy test
[Sysname-qospolicy-test]
# Associate the traffic behavior named test_behavior with the class named
test_class.
[Sysname-qospolicy-test] classifier test_class behavior test_behavio
r
[Sysname-qospolicy-test] quit
# Enter port view.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1]
# Apply the policy to the port.
[Sysname-GigabitEthernet1/0/1] qos apply policy test inbound
Displaying and
Maintaining QoS
Policy
To do… Use the command… Remarks
Display the information about
a class and the corresponding
actions associated by a policy
display qos policy user-defined
[ policy-name [ classifier
classifier-name ]]
Available in any
view
Display the information about
the policies applied on a port
display qos policy interface
[ interface-type interface-number ]
[ inbound | outbound ]
Display the information about
a traffic behavior
display traffic behavior user-defined
[ behavior-name ]
Display the information about
a class
display traffic classifier user-defined
[ classifier-name ]