306 CHAPTER 28: OSPF CONFIGURATION
Enabling the
Advertisement and
Reception of Opaque
LSAs
With this feature enabled, the OSPF router can receive and advertise Type 9, Type
10 and Type 11 opaque LSAs.
Follow these steps to enable the advertisement and reception of opaque LSAs:
Configuring OSPF
Graceful Restart
Configuring the GR
Capability
You can configure the IETF standard or non IETF standard OSPF Graceful Restart
capability.
Configuring the IETF standard OSPF GR capability
Follow these steps to configure the standard IETF OSPF GR capability:
To do… Use the command… Remarks
Enter system view system-view -
Bind OSPF MIB to an
OSPF process
ospf mib-binding process-id Optional
The first OSPF process is
bound with OSPF MIB by
default.
Enable OSPF trap snmp-agent trap enable ospf
[ process-id ] [ ifauthfail |
ifcfgerror | ifrxbadpkt |
ifstatechange | iftxretransmit |
lsdbapproachoverflow |
lsdboverflow | maxagelsa |
nbrstatechange | originatelsa |
vifcfgerror | virifauthfail |
virifrxbadpkt | virifstatechange |
viriftxretransmit |
virnbrstatechange ] *
Optional
Enabled by default
Enter OSPF view ospf [ process-id | router-id
router-id ] *
-
Enable messages
logging
enable log [ config | error | state ] Optional
Not enabled by default
To do… Use the command… Remarks
Enter system view system-view -
Enter OSPF view ospf [ process-id | router-id
router-id ] *
-
Enable the advertisement and
reception of opaque LSAs
opaque-capability enable Optional
Disabled by default
To do… Use the command… Remarks
Enter system view system-view -
Enter OSPF view ospf [ process-id | router-id
router-id ] *
-
Enable the advertisement and
reception of opaque LSAs
opaque-capability enable Required
Disabled by default
To Next Page
Loading...
