3Com Switch 4800G 24-Port - Configuration Task List

468 CHAPTER 36: IPV6 BGP CONFIGURATION
Configuration Task
List
Complete the following tasks to configure IPv6 BGP:
Task Remarks
“Configuring IPv6 BGP Basic Functions”
on page 469
“Configuring an IPv6 Peer” on page
469
Required
“Advertising a Local IPv6 Route” on
page 469
Optional
“Configuring a Preferred Value for
Routes from a Peer/Peer Group” on
page 469
Optional
“Specifying the Source Interface for
Establishing TCP Connections” on page
470
Optional
“Allowing the establishment of a
Non-Direct EBGP connection” on page
470
Optional
“Configuring a Description for a
Peer/Peer Group” on page 471
Optional
“Disabling Session Establishment to a
Peer/Peer Group” on page 471
Optional
“Logging Peer State Changes” on page
471
Optional
“Controlling Route Distribution and
Reception” on page 471
“Configuring IPv6 BGP Route
Redistribution” on page 472
Optional
“Advertising a Default Route to a
Peer/Peer Group” on page 472
Optional
“Configuring Route Distribution Policy”
on page 472
Optional
“Configuring Route Reception Policy”
on page 473
Optional
“Configuring IPv6 BGP and IGP Route
Synchronization” on page 473
Optional
“Configuring Route Dampening” on
page 474
Optional
“Configuring IPv6 BGP Route Attributes”
on page 474
“Configuring IPv6 BGP Preference and
Default LOCAL_PREF and NEXT_HOP
Attributes” on page 474
Optional
“Configuring the MED Attribute” on
page 475
Optional
“Configuring the AS_PATH Attribute”
on page 475
Optional
“Tuning and Optimizing IPv6 BGP
Networks” on page 476
“Configuring IPv6 BGP Timers” on page
476
Optional
“Configuring IPv6 BGP Soft Reset” on
page 477
Optional
“Configuring the Maximum Number of
Load-Balanced Routes” on page 478
Optional
“Configuring a Large Scale IPv6 BGP
Network” on page 478
“Configuring IPv6 BGP Peer Group” on
page 478
Optional
“Configuring IPv6 BGP Community” on
page 480
Optional
“Configuring an IPv6 BGP Route
Reflector” on page 480
Optional