3Com Switch 4800G 24-Port - SSH Client Configuration Examples

SSH Client Configuration Examples 1125
Figure 339 SSH client configuration interface (2)
From the window shown in Figure 339, click Open. The following SSH client
interface appears. If the connection is normal, you will be prompted to enter the
username (client002) to enter the configuration interface.
SSH Client
Configuration
Examples
When Using Password
Authentication
Network requirements
■ As shown in Figure 340, Switch A (the SSH client) needs to log on to Switch B
(the SSH server) through the SSH protocol.
■ The username of the SSH client is client001 and the password is aabbcc.
Password authentication is required.
Network diagram
Figure 340 Network diagram for SSH client configuration (using password
authentication)
SSH server SSH client
Switch B Switch A
Vlan-int1
10.165.87.136/24
Vlan-int1
10.165.87.137/24