3Com Switch 4800G 24-Port - Displaying and Maintaining LR

Displaying and Maintaining LR 867
LR Configuration
Examples
Limit the outbound rate of GigabitEthernet 1/0/1 to 640 kbps.
# Enter system view
<Sysname> system-view
# Enter interface view
[Sysname] interface GigabitEthernet 1/0/1
# Configure LR parameter and limit the outbound rate to 640 kbps
[Sysname-GigabitEthernet1/0/1] qos lr outbound cir 640
Displaying and
Maintaining LR
Configure LR qos lr outbound cir
committed-information-rate
[ cbs committed-burst-size ]
Required
To do… Use the command… Remarks
To do… Use the command… Remarks
Display the LR configuration
of an interface
display qos lr interface
[ interface-type
interface-number ]
Available in any view