CLI Features 1027
■ You are recommended to use the default user level; otherwise the change of
user level may bring inconvenience to your maintenance and operation.
Displaying and
Maintaining Basic
Configurations
During daily maintenance or when the system is operating abnormally, you need
to view each module’s running status to find the problem. Therefore, you are
required to execute the corresponding display commands one by one. To collect
more information one time, you can execute the display
diagnostic-information command in any view to display statistics of each
module’s running status. The execution of the display diagnostic-information
command has the same effect as that of the commands display clock, display
version, display device, and display current-configuration.
n
■ For the detailed description of the display users command, refer to
“Controlling Login Users” on page 75.
■ The display commands discussed above are for the global configuration. Refer
to the corresponding section for the display command for specific protocol
and interface.
CLI Features This section covers the following topics:
■ “Introduction to CLI” on page 1028
■ “Online Help with Command Lines” on page 1028
■ “Synchronous Information Output” on page 1029
■ “undo Form of a Command” on page 1029
■ “Edit Features” on page 1029
■ “CLI Display” on page 1030
■ “Saving History Commands” on page 1031
■ “Command Line Error Information” on page 1031
To do… Use the command… Remarks
Display information on system version display version -
Display information on the system
clock
display clock
Display information on terminal users display users [ all ]
Display the configurations saved in
the storage device
display saved-configuration
[ by-linenum ]
-
Display the current validated
configurations
display current-configuration
[[configuration [ configuration ] |
controller | interface [ interface-type ]
[ interface-number ]] [by-linenum ] [ |
{ begin | include | exclude } text ]]
Display the valid configuration under
current view
display this [ by-linenum ] -
Display clipboard information display clipboard
Display and save statistics of each
module’s running status
display diagnostic-information -
To Next Page
Loading...
