3Com Switch 4800G 24-Port - Displaying and Maintaining Ospfv3

452 CHAPTER 34: IPV6 OSPFV3 CONFIGURATION
Displaying and
Maintaining OSPFv3
Enable the logging on
neighbor state changes
log-peer-change Required
Enabled by default
To do… Use the command… Remarks
To do… Use the command… Remarks
Display OSPFv3 debugging
state information
display debugging ospfv3 Available in any
view
Display OSPFv3 process brief
information
display ospfv3 [ process-id ]
Display OSPFv3 interface
information
display ospfv3 interface
[ interface-type interface-number |
statistic ]
Display OSPFv3 LSDB
information
display ospfv3 [ process-id ] lsdb
[[external | inter-prefix | inter-router
| intra-prefix | link | network | router ]
[ link-state-id ] [ originate-router
router-id ] | total ]
Display LSA statistics in
OSPFv3 LSDB
display ospfv3 lsdb statistic
Display OSPFv3 neighbor
information
display ospfv3 [ process-id ] [ area
area-id ] peer [[interface-type
interface-number ] [ verbose ] |
peer-router-id ]
Display OSPFv3 neighbor
statistics
display ospfv3 peer statistic
Display OSPFv3 routing table
information
display ospfv3 [ process-id ] routing
[ ipv6-address prefix-length |
ipv6-address/prefix-length | abr-routes |
asbr-routes | all | statistics
]
Display OSPFv3 area topology
information
display ospfv3 [ process-id ] topology
[ area area-id ]
Display OSPFv3 virtual link
information
display ospfv3 [ process-id ] vlink
Display OSPFv3 next hop
information
display ospfv3 [ process-id ] next-hop
Display OSPFv3 link state
request list information
display ospfv3 [ process-id ]
request-list [{external | inter-prefix |
inter-router | intra-prefix | link |
network | router } [ link-state-id ]
[ originate-router ip-address ] |
statistics ]
Display OSPFv3 link state
retransmission list information
display ospfv3 [ process-id ]
retrans-list [{external | inter-prefix |
inter-router | intra-prefix | link |
network | router } [ link-state-id ]
[ originate-router ip-address ] |
statistics ]
Display OSPFv3 statistics display ospfv3 statistic