ABOUT THIS GUIDE
This guide describes the 3Com
®
Switch 4800G and how to install hardware,
configure and boot software, and maintain software and hardware. This guide
also provides troubleshooting and support information for your switch.
This guide is intended for Qualified Service personnel who are responsible for
configuring, using, and managing the switches. It assumes a working knowledge
of local area network (LAN) operations and familiarity with communication
protocols that are used to interconnect LANs.
n
Always download the Release Notes for your product from the 3Com World Wide
Web site and check for the latest updates to software and product
documentation:
http://www.3com.com
Conventions Table 1 lists icon conventions that are used throughout this guide.
Related
Documentation
The following manuals offer additional information necessary for managing your
Switch Switch 4800G:
■ Switch 4800G Command Reference Guide — Provides detailed descriptions of
command line interface (CLI) commands, that you require to manage your
Switch 4800G.
■ Switch 4800G Configuration Guide— Describes how to configure your Switch
4800G using the supported protocols and CLI commands.
■ Switch 4800G Quick Reference Guides — Provides a summary of command
line interface (CLI) commands that are required for you to manage your Switch
4800G.
Table 1 Notice Icons
Icon Notice Type Description
n
Information note Information that describes important features or
instructions.
c
Caution Information that alerts you to potential loss of data
or potential damage to an application, system, or
device.
w
Warning Information that alerts you to potential personal
injury.
To Next Page
Loading...
