776 CHAPTER 53: AAA/RADIUS/HWTACACS CONFIGURATION
Displaying and
Maintaining HWTACACS
AAA/RADIUS/HWTAC
ACS Configuration
Examples
AAA for Telnet Users by
a HWTACACS Server
Network requirements
As shown in Figure 233, configure the switch to use the HWTACACS server to
provide authentication, authorization, and accounting services to login users.
The HWTACACS server is used for authentication, authentication, and accounting.
Its IP address is 10.1.1.1.
On the switch, set the shared keys for authentication, authorization, and
accounting packets to expert. Configure the switch to remove the domain name
from a user name before sending the user name to the HWTACACS server.
On the HWTACACS server, set the shared keys for packets exchanged with the
switch to expert.
Clear buffered
stop-accounting requests that
get no responses
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name }
Available in user
view
Clear the statistics on the local
server
reset local-server statistics Available in user
view
To do… Use the command… Remarks
To do… Use the command… Remarks
Display configuration
information or statistics of the
specified or all HWTACACS
schemes
display hwtacacs
[ hwtacacs-server-name [ statistics ]]
Available in any
view
Display information about
buffered stop-accounting
requests that get no
responses
display stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Available in any
view
Clear HWTACACS statistics reset hwtacacs statistics { accounting
| all | authentication | authorization }
Available in user
view
Clear buffered
stop-accounting requests that
get no responses
reset stop-accounting-buffer
hwtacacs-scheme
hwtacacs-scheme-name
Available in user
view
To Next Page
Loading...
