EasyManua.ls Logo

3Com Switch 4800G 24-Port - Displaying and Maintaining Link Aggregation

3Com Switch 4800G 24-Port
1246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Displaying and Maintaining Link Aggregation 169
Configuring a Service
Loop Group
Follow these steps to configure a service loop group:
n
You can remove any service loop group except those that are currently
referenced by modules.
For a service loop group containing only one port, the only way to remove the
port from it is to remove the service loop group.
Entering Aggregation
Port Group View
In aggregation port group view, you can make configuration for all the member
ports in a link aggregation group at one time.
Follow these steps to enter aggregation port group view:
c
CAUTION: In aggregation port group view, you can configure aggregation related
settings such as STP, VLAN, QoS, GVRP, Q-in-Q, BPDU tunnel, MAC address
learning, but cannot add or remove member ports.
Displaying and
Maintaining Link
Aggregation
Configure a name for a link
aggregation group
link-aggregation group
agg-id description agg-name
Required
None is configured by default.
To do… Use the command… Remarks
To do… Use the command… Remarks
Enter system view system-view --
Create a manual aggregation group link-aggregation group agg-id mode
manual
Required
Specify the aggregation group as a
service loop group that is of specific type
link-aggregation group agg-id
service-type tunnel
Required
Enter Ethernet port view interface interface-type
interface-number
--
Add the Ethernet port to the
aggregation group
port link-aggregation group agg-id Required
To do… Use the command… Remarks
Enter system view system-view --
Enter aggregation port group view port-group aggregation agg-id --
To do… Use the command… Remarks
Display the local system ID display lacp system-id Available in any view
Display detailed information about
link aggregation for the specified
port or ports
display link-aggregation
interface interface-type
interface-number [ to
interface-type interface-number ]
Available in any view
Display information about the
specified or all service loop groups
display link-aggregation
service-type [ agg-id ]
Available in any view
Display summaries for all link
aggregation groups
display link-aggregation
summary
Available in any view

Table of Contents

Related product manuals