Controlling Web Users by Source IP Address 81
Configuration procedure
# Define a basic ACL.
<SW4800G> system-view
[SW4800G] acl number 2030 match-order config
[SW4800G-acl-basic-2030] rule 1 permit source 10.110.100.52 0
[SW4800G-acl-basic-2030] rule 2 deny source any
# Apply the ACL to only permit the Web users sourced from the IP address of
10.110.100.52 to access the switch.
[SW4800G] ip http acl 2030
To Next Page
Loading...
