3Com Switch 4800G 24-Port - Page 57

Telnet Configuration with Authentication Mode Being Scheme 57
n
Refer to “AAA/RADIUS/HWTACACS Configuration” on page 747 and “SSH
Configuration” on page 1107.
Table 15 Determine the command level when users logging in to switches are
authenticated in the scheme mode
Scenario
Command
level
Authenticatio
n mode User type
Command
Scheme
(authentication
-mode scheme
[ command-aut
horization ])
VTY users that
are
AAA-RADIUS
authenticated
or locally
authenticated
The user privilege level level command is
not executed, and the service-type
command does not specify the available
command level.
Level 0
The user privilege level level command is
not executed, and the service-type
command specifies the available command
level.
Determined
by the
service-type
command
The user privilege level level command is
executed, and the service-type command
does not specify the available command
level.
Level 0
The user privilege level level command is
executed, and the service-type command
specifies the available command level.
Determined
by the
service-type
command
VTY users that
are
authenticated
in the RSA
mode of SSH
The user privilege level level command is
not executed, and the service-type
command does not specify the available
command level.
Level 0
The user privilege level level command is
not executed, and the service-type
command specifies the available command
level.
The user privilege level level command is
executed, and the service-type command
does not specify the available command
level.
Determined
by the user
privilege
level level
command
The user privilege level level command is
executed, and the service-type command
specifies the available command level.
VTY users that
are
authenticated
in the
password
mode of SSH
The user privilege level level command is
not executed, and the service-type
command does not specify the available
command level.
Level 0
The user privilege level level command is
not executed, and the service-type
command specifies the available command
level.
Determined
by the
service-type
command
The user privilege level level command is
executed, and the service-type command
does not specify the available command
level.
Level 0
The user privilege level level command is
executed, and the service-type command
specifies the available command level.
Determined
by the
service-type
command