66 CHAPTER 4: LOGGING IN USING MODEM
Figure 17 Set the telephone number
Figure 18 Call the modem
Step 5: Provide the password when prompted. If the password is correct, the
prompt (such as <SW4800G>) appears. You can then configure or manage the
switch. You can also enter the character ? at anytime for help. Refer to the
following chapters for information about the configuration commands.
n
If you perform no AUX user-related configuration on the switch, the commands of
level 3 are available to modem users. Refer to “Configuring User Levels and
Command Levels” on page 1026 for information about command level.
To Next Page
Loading...
