A&D AD-4971 - Treatment of an Error at System Initialization

11 Maintenance - 11.3 Treatment of an Error at System Initialization
73
104003
Rejector
Motor error
Failure to connect
the
rejector.
Reconnect
the rejector.
Check the drive unit of rejector.
104004
DIO
error
Failure to connect I2C bus for DIO.
Restart the AD
-4971.
Contact your dealer.
105001
Count overflow.
The counter of the product
inspection has overflowed.
Reset the counter.
104005
Speed
The belt speed differs from
setting value.
Measure the speed using the
tachometer.
Contact your dealer.
104006
Speed (
Rejector)
If you have any questions, please contact your dealer.
1
11.3.
Treatment of an Error at System Initialization
1. Touch the "OK" button to close the dialog box.
2. Touch the "User
" icon in the "Home" screen to display the "Login" screen.
User level "Quality Manager" or higher is required.
3. Touch the "Setting
" icon in the "Home" screen to display the "Setting" screen.
4. Touch the "Backup / Restore" button in the "Settings" screen (System tab) to display the "Backup / Restore"
screen.
5. Touch the "Restore" button or the "Factory default" button.
6. When the storage is finished, a restart message will be displayed. Restart the AD-4971.

Information
Refer to "11.1. The system file"
