A&D AD-4971 - Specifications; List of Specifications

12 Specifications - 12.1 List of Specifications
74
1
12.
Specifications
12.1.
List of Specifications
Model
AD-4971-3510
AD-4971-3517
AD-4971-3525
Aperture height :
Height of the conveyor face.
80 mm 150 mm 230 mm
Aperture width :
Tunnel width of the sensor head.
350 mm
Belt conveyor
Width :250 mm, Length: 800 mm
Belt speed
10 to 60 m/min.
Carrying capacity
3 kg (10 to 30 m/min.) 2 kg (30 to 60 m/min.)
Detection sensitivity
Fe particle
I
0.3 mm
I
0.5 mm
I
0.7 mm
SUS particle
I
0.8 mm
I
1.0 mm
I
1.5 mm
Display & Operation
7 inch WVGA TFT color LCD, touch panel
Maximum number of items to be stored
1000 items including product data and image
Detection method
Metal detection with electromagnetic induction (EMI)
and single frequency (300 kHz)
Stabilization time
2 hours
Metal detection output
Belt stop, automatic rejecter, warning light, communication port
Communication
TCP/IP (PostScript Printer) Modbus
RS-232C (to connect to AD-4961)
USB (USB memory, history storage, image source)
Protection class
Compliance with IP65
Power
*
1
Single phase AC 100 to 240 V (+10 %, -15 %) 50/60 Hz, 100 VA
Operation temperature &
humidity range
0 to 40 °C, humidity below 85 %RH or less, no condensation
Note
*
1 Please prepare a power cable as one is not included as an accessory.