ABB ACS580-04 - Installing the Drive Module into the Enclosure; Overall Flowchart of the Installation Process; Required Tools

Spacers for roof plates.1DK 7967.000
(one set = four pieces)
Punched section with mounting flange, outer mounting level for
600 mm horizontal
5VX 8617.030
Support railsTS 4396.500
Air filter 323 mm × 323 mm. Remove the filter mats.4SK 3243.200
Customer-made parts (not ABB or Rittal parts)
See section Preventing the recirculation of hot air (page 46).2Air baffles
Required tools
• Set of screw drivers (Torx and Pozidriv)
• Set of metric magnetic-end hexagon sockets
• Torque wrench
• Step drill bit for drilling the holes in the clear plastic shroud for input power cables.
Overall flowchart of the installation process
For instructions, seeTaskStep
• Installing the drive module into the enclos-
ure (page 114)
• Installation drawings
Install the Rittal parts, drive bottom guide
plate and loose drive options in the drive
module cubicle.
1
• The component manufacturer’s instruc-
tions
• Planning the cooling of the ACS580-
04 (page 55)
• Step-by-step drawings for an installation
example of a drive module with the +B051
option in a Rittal VX25 600 mm wide enclos-
ure (page 289)
• Connecting the power cables and installing
the shrouds (page 115)
Install the auxiliary components (such as
mounting plates, air baffles, switches, busbars
etc.).
2
Attach the drive module to the enclosure
Connect the power cables and install the clear
plastic shrouds to the drive module.
• Connecting the control cables (page 107).
Connect the control cables.3
• The component manufacturer’s instruc-
tions.
• Installing the roof and door (Rittal
parts) (page 117)
Install the remaining parts, for example, cab-
inet doors, side plates, etc.
4
Installing the drive module into the enclosure
For illustrations on how to install the drive module with IP20 shrouds into a enclosure,
refer to:
• chapter Step-by-step drawings for an installation example of a drive module with
the +B051 option in a Rittal VX25 600 mm wide enclosure, and
• ACS580-04 drive modules (250 to 500 kW) quick installation guide
(3AXD50000823291 [Multilingual]).
114 Installation example of drive module with IP20 shrouds (option +B051)