￭ Lifting the drive module
Lift the drive module only by the lifting lugs:
Make sure that the module does not topple over when you move it on the floor: To
open the support legs, press each leg a little down (1, 2) and turn it aside. Whenever
possible attach the module also with chains. Do not tilt the module. It is heavy and its
center of gravity is high. The module overturns from a sideways tilt of 5 degrees. Do
not leave the module unattended on a sloping floor.
Examining the delivery
Examine that all the items are present and there are no signs of damage. Read the
data on the type designation label of the drive module to make sure that the module
is of the correct type.
66 Mechanical installation
To Next Page
Loading...
