ABB ACS580-04 - Installation Procedure (Continued)

5. Install the air baffles.
6. Install the top guide plate.
3AXD50000439317
7
8
8
9
11
10
Installation procedure (continued)
7. Install the output cabling panel.
8. Install the side guides to the output cabling panel (2 screws for each side guide).
9. Attach the grounding busbar to the input cabling panel. Back view is shown above.
10. Attach the input cabling panel to the punched section.
11. Install the telescopic extraction and insertion ramp.
294 Step-by-step drawings for installing full cabling panels (option +H381) in a Rittal VX25 400 mm wide enclosure