• PE (plastic bag and/or VCI foil)
• Metal (fixing clamps, screws).
1)
Cardboard heavy duty quality with wet strength glue in large modules.
￭ Package materials for options, accessories and spare parts
• Cardboard
• Kraft paper
• PP (straps)
• PE (foil, bubble wrap)
• Plywood, wood (only for heavy components).
Materials vary according to the item type, size and shape. Typical package consists
of a cardboard box with paper filling or bubble wrap. ESD-safe packing materials are
used for printed circuit boards and similar items.
￭ Materials of manuals
Printed product manuals are recyclable paper. Product manuals are available on the
Internet.
Disposal
The main parts of the drive can be recycled to preserve natural resources and energy.
Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and precious metals
can be recycled as material. Plastics, rubber, cardboard and other packaging material
can be used in energy recovery. Printed circuit boards and large electrolytic capacitors
need selective treatment according to IEC 62635 guidelines. To aid recycling, plastic
parts are marked with an appropriate identification code.
Contact your local ABB distributor for further information on environmental aspects
and recycling instructions for professional recyclers. End of life treatment must follow
international and local regulations.
Applicable standards
The drive complies with the following standards.
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements
– electrical, thermal and energy
IEC/EN 61800-5-1:2007
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments. Provisions for compliance: The final assembler of the machine is re-
sponsible for installing:
EN 60204-1:2006 +
A1:2009 + AC:2010
• an emergency-stop device
• a supply disconnecting device
• the IP00 drive module into a cabinet.
Degrees of protection provided by enclosures (IP code)IEC 60529:1989 +
A1:1999 + A2:2013
EN 60529:1991 +
A1:2000 + A2:2013
Technical data 193
To Next Page
Loading...
