CBAI-01 bipolar analog IO adapter
module
Contents of this chapter
This chapter describes how to install and start up the optional CBAI-01 adapter module.
The chapter also contains diagnostics and technical data.
Product overview
The CBAI-01 includes two bipolar analog inputs, two unipolar analog outputs, and a
switch which can be used to select scaling of the analog output level. The module
converts the bipolar analog inputs (-10…+10 V) to respective unipolar analog inputs
0…+10 V which can be connected to the drive control unit. It offers no additional
inputs.
23
CBAI-01 bipolar analog IO adapter module 255
To Next Page
Loading...
