ABB ACS580-04 - Terms and Abbreviations

Terms and abbreviations
DescriptionTerm
Industrial assistant non-Bluetooth control panelACS-AP-I
Standard assistant control panelACS-AP-S
Industrial assistant control panel with Bluetooth interfaceACS-AP-W
Basic control panelACS-BP-S
Bipolar analog IO extension moduleCBAI-01
Type of control unitCCU
Embedded EIA-485 fieldbus adapter moduleCEIA-01
115/230 V digital input extension moduleCHDI-01
Common mode filteringCMF
Multifunction extension module (external 24 V AC/DC and digital I/O extension)CMOD-01
Multifunction extension module (external 24 V AC/DC and isolated PTC inter-
face)
CMOD-02
Electromagnetic compatibilityEMC
Electromagnetic interferenceEMI
Optional CANopen® adapter moduleFCAN
Optional ControlNet™ adapter moduleFCNA-01
Optional DeviceNet™ adapter moduleFDNA-01
Optional EtherCAT® adapter moduleFECA-01
Optional Ethernet adapter module for EtherNet/IP™FEIP-21
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and
PROFINET IO protocols, 2-port
FENA-21
Optional Ethernet POWERLINK adapter moduleFEPL-02
Optional Ethernet adapter module for Modbus TCP protocolFMBT-21
Optional PROFIBUS DP® adapter moduleFPBA-01
Optional PROFINET IO adapter moduleFPNO-21
Physical size of the drive or power moduleFrame, frame size
Optional RS-485 (Modbus/RTU) adapterFSCA-01
Insulated gate bipolar transistorIGBT
Type of supply network that has no (low-impedance) connection to ground.
See IEC 60364-5.
IT system
Remote monitoring toolNETA-21
Programmable logic controllerPLC
Radio-frequency interferenceRFI
Series of brake resistorsSAFUR
Optical interface adapter boardSOIA
Safe torque off (IEC/EN 61800-5-2)STO
Type of supply network that provides a direct connection to groundTN system
28 Introduction to the manual