Mechanical installation
Contents of this chapter
This chapter tells how to examine the installation site, unpack and examine the delivery
and install the drive mechanically.
Examining the installation site
Examine the installation site. Make sure that:
• The installation site is sufficiently ventilated or cooled to remove heat from the
drive. See the technical data.
• The ambient conditions of the drive meet the specifications. See the technical
data.
• The material behind, above and below the drive is non-flammable.
• There is sufficient free space around the drive for cooling, maintenance, and
operation. See the free space specifications for the drive.
• Make sure that there are no sources of strong magnetic fields such as high-current
single-core conductors or contactor coils near the drive. A strong magnetic field
can cause interference or inaccuracy in the operation of the drive.
Moving and unpacking the unit
￭ Moving the drive module
Move the drive module in its transport package to the installation site.
6
Mechanical installation 61
To Next Page
Loading...
