ABB ACS580-04 - Requirements for ABB Motors, P

Requirements for ABB motors, P
n
< 100 kW (134 hp)
See also Abbreviations (page 79).
Requirement forNominal AC line
voltage
Motor type
ABB d u /d t and common mode filters, insulated
N-end motor bearings
Motor insula-
tion system
P
n
< 100 kW and frame size < IEC 315
P
n
< 134 hp and frame size < NEMA 500
-Standard U
n
≤ 500 VRandom-wound
M2_, M3_ and M4_
+ d u /d t Standard500 V < U
n
≤ 600 V
-Reinforced
+ d u /d t Reinforced600 V < U
n
≤ 690 V
(cable length ≤
150 m)
-Reinforced600 V < U
n
≤ 690 V
(cable length >
150 m)
N/AStandard380 V < U
n
≤ 690 VForm-wound HX_
and AM_
+ N + d u /d t with voltages over 500 V + CMFCheck with
the motor
manufac-
turer.
380 V < U
n
≤ 690 V
Old
1)
form-wound
HX_ and modular
+ N + CMFEnamelled
wire with
fiber glass
taping
0 V < U
n
≤ 500 V
Random-wound HX_
and AM_
2)
+ N + d u /d t + CMF500 V < U
n
≤ 690 V
Consult the motor manufacturer.HDP
1)
manufactured before 1.1.1998
2)
For motors manufactured before 1.1.1998, check for additional instructions with the motor manufacturer.
76 Guidelines for planning the electrical installation