ABB ACS580-04 - Cabinet Grounding Busbar (PE); L2;V1; L3;W1; Layout Example, Door Open (Option +B051)

Note:
• The power cable shields can also be grounded to the drive module grounding
terminals.
• See also section Free space requirements (page 58).
￭ Layout example, door open (option +B051)

PE
T3/W2
T2/V2
T1/U2
1
4
5
6
7
3
2a
2a
13
9
10
2c
2e
L1/U1
L2/V1
L3/W1
2b
13
11
A
A
3
8
A – A
14
12
13
Drive module7Supporting frame of the cabinet1
Motor cable including the protective ground
conductor of the drive module
8Vertical (2a) and horizontal (2b) air baffles with
leak-proof cable entries. The air baffles separ-
ate the cool and hot areas and prevent recircu-
lation of hot air.
2a
2b
External drive module control unit (option
+P906).
9Optional air baffle that is needed when there
is no fan on the lower part of the cabinet door
(1b in section Layout example, door
closed (page 52)).
2c
Note: With the integrated control unit, the
upper door air inlet is critical for the cooling
of the control unit.
External control cables10Cabinet grounding busbar (PE)3
54 Guidelines for planning the mechanical installation