Replacing the drive module
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death,
or damage to the equipment can occur.
Handle the drive module carefully:
• Use safety shoes with a metal toe cap to prevent foot injury.
• Lift the drive module only by the lifting lugs.
• Make sure that the module does not topple over when you move it on the floor:
Open the support legs by pressing each leg a little down (1, 2) and turning it aside.
Whenever possible attach the module also with chains. Do not tilt the drive module.
It is heavy and its center of gravity is high. The module overturns from a sideways
tilt of 5 degrees. Do not leave the module unattended on a sloping floor.
Maintenance 171
To Next Page
Loading...
