Installation example with full cabling
panels (option +H381)
Contents of this chapter
In this chapter, the drive module with full cabling panels (option +H381) is installed
into a 400 mm wide Rittal VX25 enclosure in a bookshelf way of mounting. The module
is placed in an upright position on the enclosure bottom with its front facing the
enclosure door. Space for the additional components can be made by connecting two
or more VX25 enclosures together. Available alternative ABB parts are also given.
Safety
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur. If you are not a qualified
electrical professional, do not do installation, commissioning or
maintenance work.
10
Installation example with full cabling panels (option +H381) 121
To Next Page
Loading...
