ABB ACS580-04 - Product outline drawing (S5,S6)

1
2
3
3AUA0000086323
• To prevent the drive module from falling, attach its top lifting lugs with chains to
the cabinet (1) before you push the module into the cabinet and pull it from the
cabinet. Push the module into the cabinet and pull it from the cabinet carefully
preferably with help from another person. Keep a constant pressure with one foot
on the base of the module (2) to prevent the module from falling on its back.
1
2
1
2
• Beware of hot surfaces. Some parts, such as heatsinks of power semiconductors,
and brake resistors, remain hot for a while after disconnection of the electrical
supply.
• Vacuum clean the area around the drive before the start-up to prevent the drive
cooling fan from drawing dust inside the drive.
Safety instructions 19