ABB ACS580-04 - Page 63

Accessories box6
Pallet7
To unpack:
• Cut the bands (A).
• Unpack the additional boxes (B).
• Remove the outer sheathing by lifting it (C).
• Remove the sheathing by lifting it (D).
• Remove the pedestal guide plate as shown below.
Note: The pedestal guide plate is not included with options +0H354 and +0P919.
Box B1 contents (option +B051)
3AXD50000013807
1
3 4
5
6 7
8
9
10
11
13
15
17
18
16
14
12
2
Paper fill1
Clear plastic shroud for output
power cabling
2
Mounting bracket for bottom grille3
Cardboard box bottom4
Cardboard box cover5
Bottom grille6
Support7
Straps8
Screws in a plastic bag9
Back clear plastic shroud (lower)10
Back clear plastic shroud (upper)11
Front clear plastic shroud12
Clear plastic shroud for input power
cabling
13
Top clear plastic shroud14
Entry clear plastic shroud for side
input cabling
15
Clear plastic bottom shroud 116
Clear plastic bottom shroud 217
Metallic shroud18
Mechanical installation 63
10