WARNING!
Use extreme caution when maneuvering the inverter module. It is heavy and
has a high center of gravity. Ignoring the following instructions can cause
physical injury, or damage to the equipment.
• Use the required personal protection equipment: safety shoes with metal
toe cap, protective gloves, etc.
• Do not use the module extraction/installation ramp with plinth heights
that exceed the maximum allowed height.
• Push the module into the cabinet and pull it from the cabinet carefully
preferably with help from another person. Keep a constant pressure with
one foot on the base of the module to prevent the module from falling on
its back. Keep your fingers away from the edges of the front flange of the
module.
• Be careful when handling a tall module. The module overturns easily because
it is heavy and has a high center of gravity. Whenever possible, secure the
module with chains. Do not leave an unsupported module unattended
especially on a sloping floor.
Maintenance 127
To Next Page
Loading...
