The Safe torque off function complies with these standards:
NameStandard
Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
IEC 60204-1:2021
EN 60204-1:2018
Electromagnetic compatibility (EMC) – Part 6-7: Generic standards –
Immunity requirements for equipment intended to perform functions
in a safety-related system (functional safety) in industrial locations
IEC 61000-6-7:2014
Electrical equipment for measurement, control and laboratory use –
EMC requirements – Part 3-1: Immunity requirements for safety-re-
lated systems and for equipment intended toperform safety-related
functions (functional safety) – General industrial applications
IEC 61326-3-1:2017
Functional safety of electrical/electronic/programmable electronic
safety-related systems – Part 1: General requirements
IEC 61508-1:2010
Functional safety of electrical/electronic/programmable electronic
safety-related systems – Part 2: Requirements for electrical/electron-
ic/programmable electronic safety-related systems
IEC 61508-2:2010
Functional safety – Safety instrumented systems for the process in-
dustry sector
IEC 61511-1:2017
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements – Functional
IEC 61800-5-2:2016
EN 61800-5-2:2007
Safety of machinery – Functional safety of safety-related control
systems
EN IEC 62061:2021
Safety of machinery – Safety-related parts of control systems – Part 1:
General principles for design
EN ISO 13849-1:2015
Safety of machinery – Safety-related parts of control systems – Part
2: Validation
EN ISO 13849-2:2012
The function also corresponds to Prevention of unexpected start-up as specified by
EN ISO 14118:2018 (ISO 14118:2017), and Uncontrolled stop (stop category 0) as
specified in EN/IEC 60204-1.
￭
Compliance with the European Machinery Directive and the UK Supply
of Machinery (Safety) Regulations
See ACS880 multidrive cabinets and modules electrical planning instructions
(3AUA0000102324 [English]).
192 The Safe torque off function
To Next Page
Loading...
