ABB ACS880-107

Type designation key
￭
Type designation key of the inverter unit
The type designation contains information on the specifications and configuration
of the drive. The first digits from left express the basic drive type. The optional
selections are given thereafter, separated by plus signs, eg, +E202. Codes preceded
by a zero (eg. +0J400) indicate the absence of the specified feature. The main selections
are described below. Not all selections are available for all types. For more information,
refer to the ordering instructions available separately on request.
DescriptionCode
Basic code
Product seriesACS880
Default configuration: Inverter unit, IEC industrial cabinet construction, plinth height 50 mm,
IP22 (UL type 1), 50 Hz supply frequency, control (auxiliary) voltage 230 V AC, bottom entry
and exit of cables, European-style motor cable entries, aluminum DC busbars (up to 3200 A),
tin-plated copper DC busbars (from 3200 A up), speed-controlled module cooling fans, DC
fuses, DC fuse/disconnectors (frames R1i…R5i only), standard wire markings, ACS880 primary
control program, Safe torque off function, coated circuit boards, USB memory stick containing
complete documentation in English.
ACS880-
107
Size
Refer to the rating tablesxxxxx
Voltage range
513…566 V DC. This is indicated in the type designation label as typical input voltage level
(566 V DC).
3
513…707 V DC. This is indicated in the type designation label as typical input voltage levels
(566/679/707 V DC).
5
709…976 V DC. This is indicated in the type designation label as typical input voltage levels
(742/849/976 V DC).
7
Option codes
DescriptionCode
50 Hz supply frequencyA012
60 Hz supply frequencyA013
IP22 (UL Type 1)B053
IP42 (UL Type 1 Filtered)B054
IP54 (UL Type 12)B055
Marine constructionC121
Air inlet through bottom of cabinetC128
UL Listed (evaluated to both U.S. and Canadian safety requirements)C129
Channeled air outletC130
Marine type approval. Refer to ACS880…+C132 marine type-approved cabinet-built drives
supplement (3AXD50000039629 [English]).
C132
CSA approvedC134
Plinth height 100 mmC164
Door hinges on leftC176
Plinth height 200 mmC179
Operation principle and hardware description 37