Frame R8i and multiples
The standard cubicle widths are 400 mm (frame R8i), 600 mm (2×R8i) and 800 mm
(3×R8i). The approximate weights of the cubicles are 320, 510 and 660 kg (705, 1125
and 1455 lbs) respectively. Larger inverter units are combinations of these cubicles.
As standard, the control equipment is located in a separate 300 mm wide cubicle
(DCU). A 400 mm wide cubicle is optionally available.
Option +C128 (cooling air intake through floor of cabinet) extends the cabinet depth
by 130 mm. Option +H353 (motor cabling through roof of cabinet) extends the cabinet
depth by 200 mm.
168 Dimensions and weights
To Next Page
Loading...
