ABB ACS880-107

The subcodes are described below.
DescriptionCode
Basic codes
Product seriesACS880
Construction: Inverter, supply, converter or brake module.104
Size
Refer to the ratings table in the technical data.xxxxx
Voltage range
513…566 V DC. This is indicated in the type designation label as typical input voltage
level (566 V DC).
3
513…707 V DC. This is indicated in the type designation label as typical input voltage
levels (566/679/707 V DC).
5
709…976 V DC. This is indicated in the type designation label as typical input voltage
levels (742/849/976 V DC).
7
Option codes (plus codes)
UL Listed (evaluated to both U.S. and Canadian safety requirements)C129
Marine type approvalC132
CSA approvedC134
Direct-on-line (DOL) cooling fanC188
Marine product certification issued by Bureau VeritasC209
Internal d u /d t filteringE205
115 V auxiliary voltage supplyG304
Winder control programN5000
Crane control programN5050
Winch control programN5100
PCP/ESP control programN5200
Test bench control programN5300
ESP control programN5600
Position control programN5700
SynRM control firmwareN7502
Drive application programmingN8010
High speed versionN8200
Extended warranty (30 months from delivery or 24 months from commissioning)P904
Extended warranty (42 months from delivery or 36 months from commissioning)P909
Module variant with capability for increased switching frequencyP967
ATEX-certified Safe Disconnection Function, Ex II (2) GDQ971
Module auxiliary and fan power supply connector changeV112
Frames R6i and R7i: Hardware version added to product offering during 2023.V992
42 Operation principle and hardware description