ABB IRB 6640 Foundry Prime - Inspection Activities

3.3 Inspection activities
3.3.1 Inspecting the oil level in axis-1 gearbox
Location of gearbox
The axis-1 gearbox is located between the frame and base. See oil plugs in the
following figure.
A
B
C
xx0600003449
Oil plug, fillingA
Oil plug, inspectionB
Oil plug, drainingC
Required equipment
NoteArt. no.Equipment
Note
Do not mix with other oils!
See Type and
amount of oil in
gearboxes on
page 168.
Lubricating oil
Content is defined in section
Standard tools on page 465.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
Product manual - IRB 6640 Foundry Prime 127
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.3.1 Inspecting the oil level in axis-1 gearbox