ABB IRB 6640 Foundry Prime - Inspecting the Signal Lamp (Option)

3.3.15 Inspecting the signal lamp (option)
Location of signal lamp
The signal lamp is located as shown in this figure.
Note that the position can differ depending on how the customer harness for axis
4-6 is mounted. See assembly drawing on the current harness for alternative
positioning.
xx0600003071
UL signal lampA
ClampB
Cable strap, outdoorC
Motor, axis 3D
Attachment screw, M6x8 quality 8-A2F (2 pcs)E
Required tools and equipment
NoteArticle numberEquipment
To be replaced if damage is detected.See Spare parts on
page 487.
Signal lamp kit
Content is defined in section Stand-
ard tools on page 465.
-Standard toolkit
Continues on next page
166 Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.3.15 Inspecting the signal lamp (option)