ABB IRB 6640 Foundry Prime - Apply Mercasol on Output Shaft Axis 3

3.6.6 Apply Mercasol on output shaft axis 3
Location of the gear axis 3
The gear axis 2 is located as shown in the illustration.
xx1500001667
Required tools and equipment
NoteArticle numberEquipment
Brush
Required consumables
NoteArticle numberConsumable
Equivalent:
• Mercasol
3HAC034903-001Rust preventive
Procedure
The procedure describes how to remove and apply rust preventive output shaft
axis 3.
NoteAction
Put the robot in a suitable position.1
Continues on next page
208 Product manual - IRB 6640 Foundry Prime
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.6.6 Apply Mercasol on output shaft axis 3