ABB IRB 6640 Foundry Prime - Replacing the Brake Release Board

4.5.2 Replacing the brake release board
Location of brake release board
The brake release unit is located together with the SMB unit on the left hand side
of the frame, right next to the gearbox, axis 2, as shown in figure below.
xx0700000123
Brake release unitA
Push button guardB
Battery coverC
BatteryD
SMB coverE
Battery cableF
Required equipment
NoteArticle numberEquipment, etc.
DSQC10503HAC065020-
001
Brake release board
Content is defined in section Standard
tools on page 465.
-Standard toolkit
These procedures include references
to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
Product manual - IRB 6640 Foundry Prime 293
3HAC040586-001 Revision: N
© Copyright 2011-2018 ABB. All rights reserved.
4 Repair
4.5.2 Replacing the brake release board